Processing Password Questions

John Esak john at valar.com
Mon Dec 26 13:32:28 PST 2005



Gary,
Unfortunately, I don't think you're off the hook yet. From the time the 4th
line had the password on it... every processing table you saved will have
that password written into it. If you have always had ABE=ASCII set in your
config file (or just in the environment) you won't have too much trouble
removing it from these files. If you don't have that set, you are in for
some hassle when you try and modify one of those passwords. Is there *any*
chance you have a save/backup with the fppath file that *had* the 4th line
password on it. At least then you could copy it and use it to get rid of
*all* the passwords first, *then* get rid of the 4th line.

Did you by any chance copy it down? Or, hopefully, you can restore a backup
that *has* that fourth line. If you SAVE'd any processing tables while it
was in place, they will be infected/infested/protected/snarfed with this
password, and you won't be able to edit them again without getting rid of it
somehow.

John



> -----Original Message-----
> From: filepro-list-bounces at lists.celestial.com
> [mailto:filepro-list-bounces at lists.celestial.com]On Behalf Of Gary Olman
> Sent: Monday, December 26, 2005 10:34 AM
> To: Filepro-List
> Subject: RE: Processing Password Questions
>
>
> Thank you all. The problem was that I had some thing on line 4 in FPPATH.
> Probably an old site password setting.  I removed it and  Now it
> seems to be
> working fine.
> Gary
>
>
> -----Original Message-----
> From: GCC Consulting [mailto:gccconsulting at comcast.net]
> Sent: Sunday, December 25, 2005 3:50 PM
> To: 'Gary Olman'; 'Fpl'
> Subject: RE: Processing Password Questions
>
>
>
> -----Original Message-----
> From: filepro-list-bounces at lists.celestial.com
> [mailto:filepro-list-bounces at lists.celestial.com] On Behalf Of Gary Olman
> Sent: Sunday, December 25, 2005 2:10 PM
> To: 'Fpl'
> Subject: FW: Processing Password Questions
>
>
>
> -----Original Message-----
> From: Gary Olman [mailto:garyolman1 at hvc.rr.com]
> Sent: Saturday, December 24, 2005 9:29 AM
> To: 'filepro-list-bounces at lists.celestial.com'
> Subject: Processing Password Questions
>
> Using FP 5.0.14 on XP single user. I have no passwords set and I
> don't want
> any. It seems that if I break out of a process using the "X" in the upper
> right corner, and if I have debug on set in the process, I will build a
> processing password, which I don't want. To get rid of it I have
> to open the
> process in Word and remove it.
>
> The question is what is setting the password and how can I eliminate it
> forever?
> Thanks
> Gary
>
> The simple answer, but one you are probably mot looking for, is DON'T SHUT
> DOWN FP using the X button.  When you do this, fp is not exited properly.
> Windows has no idea of how to close fp properly and your
> processing table is
> closed in an unnatural state.  If you want to exit fp, close it
> properly.
>
> If you need to debug a process and it may "run away" while
> debugging, make a
> copy of the processing table before you debug it, or select just a few
> records to test on.
>
> Richard Kreiss
> GCC Consulting
>
>
> _______________________________________________
> Filepro-list mailing list
> Filepro-list at lists.celestial.com
> http://mailman.celestial.com/mailman/listinfo/filepro-list



More information about the Filepro-list mailing list