screen flicker problem

Richard Kreiss rkreiss at gccconsulting.net
Wed Jul 13 15:26:12 PDT 2011



> -----Original Message-----
> From: Kenneth Brody [mailto:kenbrody at spamcop.net]
> Sent: Wednesday, July 13, 2011 6:16 PM
> To: rkreiss at gccconsulting.net
> Cc: 'fplist'
> Subject: Re: screen flicker problem
> 
> On 7/13/2011 5:18 PM, Richard Kreiss wrote:
> [...]
> > I have a client with HP desktops running win 7 pro.  They are having a
> > problem in that values entered into dummy fields using the numeric
> > keypad are not visible.
> 
> Yet, if they use the numeric keys at the top of the keyboard, they are
visible?
> 
> Assuming it's not something like num-lock being off, and the numbers
aren't
> being entered (the numbers being entered are seen by filePro, correct?), I
> can't imagine what could cause something like that.
> 
> >  A dummy field that holds a lookup up value does flash on screen then
> > disappears.
> 
> What does your code do with that field?

Ken, this program is at least 15 year old going from dos to Windows 95 to
windows 98 and then windows XP.  It has worked properly through all of those
operating system changes until Windows 7.  It is not the code as far as I
can tell as I haven't changed it in over 3 years.

1. The offices were recently rewired to cat.  
2.  New Windows 7 computers have been installed
3. Some older computer are being used for non-filepro programs and it is
possible that one or more of these may have bad NICS.
4. A switch was installed in a second floor office to allow for 4 computers
to be installed (see 3 above) - Old switch which could be bad.

I need to go up to my client's and work through the problem from a hardware
standpoint.

Richard

> 
> > I have not had a chance to work out this problem yet.  My feeling this
> > is an issue other than with filePro and Win 7.
> 
> --
> Kenneth Brody




More information about the Filepro-list mailing list