@ud and @ub updated

[Dennis Malen]

Bruce,

The only line I am not using is "display". Did you add that for a reason?

Dennis Malen
516.479.5912
----- Original Message ----- 
From: "Bruce Easton" <bruce at stn.com>
To: <filepro-list at lists.celestial.com>
Sent: Friday, April 06, 2007 7:26 PM
Subject: RE: @ud and @ub updated


> (top posted from 30% down)
> 
>        If:
>       Then: end
>  2  -------   -   -   -   -   -   -   -   -   -
> @keyf    If:
>       Then: input popup wk(8,.0) "Enter REC#"
>  3  -------   -   -   -   -   -   -   -   -   -
>         If:
>       Then: lookup - r=wk  -nw
>  4  -------   -   -   -   -   -   -   -   -   -
>         If:
>       Then: display
>  5  -------   -   -   -   -   -   -   -   -   -
>         If:
>       Then: end
> This does not cause my sys fields to change.
> 
> Bruce
> 
> Dennis Malen wrote Friday, April 06, 2007 6:32 PM
>>
>> Bruce,
>>
>> Would you be able to give me an example?
> 
>>My basic programming
>> approach is to
>> never write to the file in automatic processing.
> 
> Nor I  [Bruce]
> 
>> Dennis Malen
>> 516.479.5912
>> ----- Original Message -----
>> From: "Bruce Easton" <bruce at stn.com>
>> To: <filepro-list at lists.celestial.com>
>> Sent: Friday, April 06, 2007 5:33 PM
>> Subject: RE: @ud and @ub updated
>>
>>
>> > Dennis Malen wrote Friday, April 06, 2007 5:21 PM:
>> >> ----- Original Message -----
>> >> From: "Jeff Harrison" <jeffaharrison at yahoo.com>
>> >> To: "Dennis Malen" <dmalen at malen.com>;
>> <filepro-list at lists.celestial.com>
>> >> Sent: Friday, April 06, 2007 4:28 PM
>> >> Subject: Re: @ud and @ub updated
>> >>
>> >>
>> >> >
>> >> > --- Dennis Malen <dmalen at malen.com> wrote:
>> >> >
>> >> >> I am using the following on a @key request:
>> >> >>
>> >> >>  input popup wk"Enter RECORD NUMBER"
>> >> >>    -   -   -   -   -   -   -   -   -   -   -   -   -
>> >> >>   -   -   -
>> >> >>  wk=""
>> >> >>  end
>> >> >>    -   -   -   -   -   -   -   -   -   -   -   -   -
>> >> >>   -   -   -
>> >> >>
>> >> >>  lookup -  r=wk   -nw
>> >> >>
>> >> >> Problem: When we are brought to the record, before
>> >> >> we go to update it
>> >> >> changes @ud to today's date and changes @ub to the
>> >> >> current user.
>> >> >>
>> >> >> We are on 5.0. When we were on 4.8 this did not
>> >> >> happen.
>> >> >>
>> >> >> Does anyone have any ideas?
>> >> >>
>> >> >> Dennis Malen
>> >> >> 516.479.5912
>> >> >>
>> >> >
>> >> > Hi Dennis.  Do you mean that if you do a show
>> >> > "@ud="<@ud right after the lookup dash that it shows
>> >> > today's date on a record that was not updated today?
>> >> >
>> >> > I tried this using filepro 5.0 on a windows box and it
>> >> > showed the original date as I would expect.
>> >> >
>> >> > Jeff Harrison
>> >> > jeffaharrison at yahoo.com
>> >> >
>> >
>> > I don't see that happening on my 5.0 either.  Could you have
>> > something in an automatic table that is writing to the record?
>> >
>> > Bruce
>> >
>> > Bruce Easton
>> > STN, Inc.
>> >
>> > _______________________________________________
>> > Filepro-list mailing list
>> > Filepro-list at lists.celestial.com
>> > http://mailman.celestial.com/mailman/listinfo/filepro-list
>> >
>> >
>> >
>>
>>
> 
> _______________________________________________
> Filepro-list mailing list
> Filepro-list at lists.celestial.com
> http://mailman.celestial.com/mailman/listinfo/filepro-list
> 
> 
>