@ud and @ub updated

[Bruce Easton]

(top posted from 30% down)

        If:
       Then: end
  2  -------   -   -   -   -   -   -   -   -   -
@keyf    If:
       Then: input popup wk(8,.0) "Enter REC#"
  3  -------   -   -   -   -   -   -   -   -   -
         If:
       Then: lookup - r=wk  -nw
  4  -------   -   -   -   -   -   -   -   -   -
         If:
       Then: display
  5  -------   -   -   -   -   -   -   -   -   -
         If:
       Then: end
This does not cause my sys fields to change.

Bruce

Dennis Malen wrote Friday, April 06, 2007 6:32 PM
>
> Bruce,
>
> Would you be able to give me an example?

>My basic programming
> approach is to
> never write to the file in automatic processing.

Nor I  [Bruce]

> Dennis Malen
> 516.479.5912
> ----- Original Message -----
> From: "Bruce Easton" <bruce at stn.com>
> To: <filepro-list at lists.celestial.com>
> Sent: Friday, April 06, 2007 5:33 PM
> Subject: RE: @ud and @ub updated
>
>
> > Dennis Malen wrote Friday, April 06, 2007 5:21 PM:
> >> ----- Original Message -----
> >> From: "Jeff Harrison" <jeffaharrison at yahoo.com>
> >> To: "Dennis Malen" <dmalen at malen.com>;
> <filepro-list at lists.celestial.com>
> >> Sent: Friday, April 06, 2007 4:28 PM
> >> Subject: Re: @ud and @ub updated
> >>
> >>
> >> >
> >> > --- Dennis Malen <dmalen at malen.com> wrote:
> >> >
> >> >> I am using the following on a @key request:
> >> >>
> >> >>  input popup wk"Enter RECORD NUMBER"
> >> >>    -   -   -   -   -   -   -   -   -   -   -   -   -
> >> >>   -   -   -
> >> >>  wk=""
> >> >>  end
> >> >>    -   -   -   -   -   -   -   -   -   -   -   -   -
> >> >>   -   -   -
> >> >>
> >> >>  lookup -  r=wk   -nw
> >> >>
> >> >> Problem: When we are brought to the record, before
> >> >> we go to update it
> >> >> changes @ud to today's date and changes @ub to the
> >> >> current user.
> >> >>
> >> >> We are on 5.0. When we were on 4.8 this did not
> >> >> happen.
> >> >>
> >> >> Does anyone have any ideas?
> >> >>
> >> >> Dennis Malen
> >> >> 516.479.5912
> >> >>
> >> >
> >> > Hi Dennis.  Do you mean that if you do a show
> >> > "@ud="<@ud right after the lookup dash that it shows
> >> > today's date on a record that was not updated today?
> >> >
> >> > I tried this using filepro 5.0 on a windows box and it
> >> > showed the original date as I would expect.
> >> >
> >> > Jeff Harrison
> >> > jeffaharrison at yahoo.com
> >> >
> >
> > I don't see that happening on my 5.0 either.  Could you have
> > something in an automatic table that is writing to the record?
> >
> > Bruce
> >
> > Bruce Easton
> > STN, Inc.
> >
> > _______________________________________________
> > Filepro-list mailing list
> > Filepro-list at lists.celestial.com
> > http://mailman.celestial.com/mailman/listinfo/filepro-list
> >
> >
> >
>
>