filePro and Anzio Lite?

John Esak john at valar.com
Tue Sep 6 16:44:45 PDT 2005


A million years ago, FacetCorp had a *similar* problem with filePro . Very,
very similar. The vertical graphic lines of the menus were sending something
strange that was goofing up Facetterm with a ^?... They fixed the problem by
putting an intercept for a particular character sequence in one of the
terminal files for Facetterm. Fixed the problem immediatley.  I will look up
the exact sequence when I get back from "outback" tonight. Post it here
then.

It may be completely way off-base, bu then, it might be just the thing...
who knows. Worth a shot, right?

John





> -----Original Message-----
> From: filepro-list-bounces at lists.celestial.com
> [mailto:filepro-list-bounces at lists.celestial.com]On Behalf Of Bob
> Rasmussen
> Sent: Tuesday, September 06, 2005 6:14 PM
> To: Fairlight
> Cc: filePro Mailing List
> Subject: Re: filePro and Anzio Lite?
>
>
> On Thu, 1 Sep 2005, Fairlight wrote:
>
> > ...
> > > 6. When characters double up, it usually indicates that Anzio has been
> > > forced into Half Duplex mode. This can happen if Anzio receives
> > >    Esc [ 12 l
> > > (that's an ell on the end).
> >
> > Confirmed that it's in FD mode beforehand and HD mode
> afterwards.  What's
> > more, I've traced it to something happening right after you hit
> enter with
> > the menu password.  I checked the FD setting in the Communicate
> menu, and
> > it was on before that, and off after it.  If I turn it back on, it does
> > -not- go back off on exiting.  It does not go off if I launch dcabe.
> > However, it goes off when coming back from dcabe.  Same with the menu
> > creation program.  Probably coming back from anything.
> >
> > This is definitely runmenu at work.
> >
> > Tried mapchan -n with an entry that says to use it.  No help.
> >
> > Okay, I just ran it from inside 'script' and am looking at the
> results for
> > something obvious.
> >
> > > Bottom line, Anzio is receiving a bad control sequence. It
> might come from
> > > a) the filePro termcap entry, b) the /etc/termcap, c) the
> terminfo entry,
> > > or d) a particular program. Anzio responds to way more sequences than
> > > single-model emulators.
> >
> > It's definitely choice B.
> >
> > However, I'm looking at the typescript file of the entire run, and I see
> > many ESC[12 codes, but not a single one of them is ESC[12]
> according to a
> > search of the results for "12]".  Are there any other codes to look for
> > that would do this to Anzio?
>
> No, not "]" (square bracket), "l" (ell).
>
> You can see the last 8192 characters Anzio received by going to
> Diagnose:Interpret. Control codes will be shown as reverse video
> hexadecimal. This is a scrollable buffer, with the latest at the bottom.
>
> Regards,
> ....Bob Rasmussen,   President,   Rasmussen Software, Inc.
>
> personal e-mail: ras at anzio.com
>  company e-mail: rsi at anzio.com
>           voice: (US) 503-624-0360 (9:00-6:00 Pacific Time)
>             fax: (US) 503-624-0760
>             web: http://www.anzio.com
> _______________________________________________
> Filepro-list mailing list
> Filepro-list at lists.celestial.com
> http://mailman.celestial.com/mailman/listinfo/filepro-list



More information about the Filepro-list mailing list