Canon Copier/Printer

[Jim Asman]

--------------- Original Message ---------------
At 03:27P Thu Jul 21 2005, Don Coleman wrote:

> I have a client who just had her office moved.  She previously printed 
> her fP output to an HP LaserJet (1100 or 1200).  She must now print to a 
> Canon IR5000 Copier/Laser.  No problem printing to the printer except 
> that the top heading portion of her fP output is being cut off.  This 
> was not the case when printing to the HPLaser.  I am using the following 
> HPLASER printer type within fP & I use the following print code which 
> was suggested by Jim Asman a number of years ago.
> $1b &l 2a 0o 6d oe 66F    Initialize Printer
> This would put a laser in 66 lines per page mode.  Is there an 
> additional command or print code that can be added to reduce the top 
> margin.  I assume it is set for 1" and would like to try either .5 or 
> .75".  I know they should be able to change this in the menu settings 
> for the printer but that would affect all of their print requests, not 
> just those generated by fP.  Any suggestions appreciated.
> 

The printcode you are using specifies NO top margin at all.

You cannot, however, physically mark the top line on the page
even though it exists logically.

Try $1b &l2a0o7.27c3e66F


Jim 
--
jlasman at telus.net                       Spectra Colour Services Ltd.
Jim Asman                               10221 144A Street
Phone: (604)584-0977                    Surrey, BC  V3R 3P7             
 Cell: (604)619-0977                    CANADA