problem with large file adding records

[Cole, Ken (ABRC)]

Richard,

Check ulimit, depending on the maximum file size and the size of the
records you may have a file size limitation.
Ken

> -----Original Message-----
> From: filepro-list-bounces at lists.celestial.com
> [mailto:filepro-list-bounces at lists.celestial.com] On Behalf
> Of Richard D. Williams
> Sent: Friday, 16 December 2005 2:26 PM
> To: filepro-list at lists.celestial.com
> Subject: problem with large file adding records
>
> Red Hat Linux 7.3
> FP
>
>
> This file may not be large to some, but about 280000 records
> is the largest for this client.
> We can not add record.  There is no error. If you try to add
> record via a processing table, it just exits.
> This is my df on this box
> Filesystem           1K-blocks      Used Available Use% Mounted on
> /dev/md1              75671728  46409008  25418776  65% /
> /dev/md0                132134     19247    106065  16% /boot
> none                    515484         0    515484   0% /dev/shm
>
> If you try adding records via 3- Add Records, it just exits.
>
> I have tried using expanding records with a zero entry,
> thinking this might reset something in the file. No change.
> When I looked at the number of records that could be added
> using A - Add Records, it says 0!
>
> I have try to reruild a index and I get a "BixCreate failed".
>
> I can add recods to smaller files using the 3 - add records
> at dclerk.
> But even on the small files A - Add Records reports 0 records
> can be added.
>
> Can anyone tell me what could be happening here.
>
> Any suggestions are welcome,
>
> Richard D. Williams
>
> _______________________________________________
> Filepro-list mailing list
> Filepro-list at lists.celestial.com
> http://mailman.celestial.com/mailman/listinfo/filepro-list
>

******************************************
The information contained in, or attached to, this e-mail, may contain confidential information and is intended solely for the use of the individual or entity to whom they are addressed and may be subject to legal privilege.  If you have received this e-mail in error you should notify the sender immediately by reply e-mail, delete the message from your system and notify your system manager.  Please do not copy it for any purpose, or disclose its contents to any other person.  The views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of the company.  The recipient should check this e-mail and any attachments for the presence of viruses.  The company accepts no liability for any damage caused, directly or indirectly, by any virus transmitted in this email.
******************************************