linux- filepro -putty
Enrique Arredondo
henry at vegena.net
Tue Mar 16 09:41:47 PST 2004
----- Original Message -----
From: "Bill Vermillion" <fp at wjv.com>
To: <filepro-list at seaslug.org>
Sent: Tuesday, March 16, 2004 9:16 AM
Subject: Re: linux- filepro -putty
> On Tue, Mar 16, 2004 at 08:53:13AM -0800, Enrique Arredondo thus spoke:
> >
> > ----- Original Message -----
> > From: "Jay R. Ashworth" <jra at baylink.com>
> > To: <filepro-list at seaslug.org>
> > Sent: Monday, March 15, 2004 5:54 PM
> > Subject: Re: linux- filepro -putty
>
> >
> > > On Mon, Mar 15, 2004 at 07:34:21PM -0500, Fairlight wrote:
> > >
> > > > Confusious (Enrique Arredondo) say:
> > > >
> > > > > for Red Hat linux running filepro 5.0.13 which is the
> > > > > best terminal emulation over ssh that would support
> > > > > instering lines and deleting lines when doing developing.
>
> > > > I use PFTERM=xterm with PuTTY.
>
> > > Which works ok, as long as you have a sufficiently recent
> > > version of the filePro termcap file. Since fpTech Release
> > > Engineering (<roar)) doesn't bother to put release numbers
> > > in these things, I can't tell you exactly which one it is I
> > > use, but I'm pretty sure all the 5.0's will let you do that
> > > unmodified. It *might* need to be from a Linux version of
> > > filePro -- ISTR that I could do it with 4.8/Linux, but *not*
> > > with 4.8/SCO.
>
> > Could you please decipher the following ,which code means
> > insert a line :
>
> Termcaps aren't that hard to decipher. Note the F1-F4 below,
> where the F1 inserts char and F3 inserts line.
>
> The L0 thru Lx are the labels used. Notice that L0-L3 are labeled
> F1-F4. The L's match the P's. So if F3 inserts a line it shows
> L2=F3. The L's and P's correspond so the key defined so
> when the system sees \EOR it is associated with P2.
>
>
>
> > xterm|xterm-color|rxvt|XFree86 3.3.x xterm or rxvt 2.x:\
> > :am:cd=\E[J:ce=\E[K:cl=\E[2J\EH:co#80:dc=\E[P:dl=\E[M:dn=\E[B:\
> >
:ho=\E[H:ic=\E[@:li#25:kh=\E[H:ku=\E[A:kd=\E[B:kl=\E[D:kr=\E[C:eo:\
> > :GS=\E(0:GE=\E(B:\
> > :GV=x:GH=q:G1=k:G2=l:G3=m:G4=j:GZ=:\
> > :GU=v:GD=w:GC=n:GR=t:GL=u:RT=^J:\
> > :tc=linux:\
> > :L0=F1:L1=F2:L2=F3:L3=F4:L4=ESC ESC:L5=F5:\
> > :L6=Pg Up:L7=Pg Dn:L8=ESC TAB:L9=TAB:LA=Ctrl-O:\
> > :LB=F6:LC=Ctrl-L:LD=F7:\
> > :LE=F8:LG=Ctrl-X:LH=F9:LY=Ctrl-C:LZ=Enter:\
> > :P0=\EOP:P1=\EOQ:P2=\EOR:P3=\EOS:P4=\E\E:P5=\E[15~:\
> > :P6=\E[5~:P7=\E[6~:P8=\E^I:P9=^I:\
> > :PA=^O:PB=\E[17~:PC=^L:PD=\E[18~:PE=\E[19~:PG=^X:PH=\E[20~:\
> > :PJ=\E[21~:LJ=F10:
> >
Ahhh so if I see that when I hit the F1-F4 keys on putty it display 1~ 2~ 3~
4~ , so then I go to the termcap and change that EOS EOR, etc... for 1~ 2~
3~ 4~ and it will work ?
Enrique.
More information about the Filepro-list
mailing list