OT: Hylafax & digital DID
Joe Chasan
joe at magnatechonline.com
Mon Aug 9 14:20:21 PDT 2004
On Mon, Aug 09, 2004 at 04:55:01PM -0400, Jay R. Ashworth wrote:
> On Mon, Aug 09, 2004 at 04:50:54PM -0400, Joe Chasan wrote:
> > DID is not 2-wire analog - it is a dedicated rj-12 connector which i
> > believe is different from the regular 2-wire analog - i want the modem
> > to perform the DID functions, not the phone switch.
>
> DID is delivered one of two ways: on a specialized analog trunk,
> suitable to be terminated by, e.g., a Dialogic DID-120 card (this is
> fairly rare these days, and only seen on *old* legacy installs) or on a
> D-4/ESF T-span (or an ISDN PRI).
>
> The signalling is commonly DTMF on the analog or T-1 trunks, between
> the offer wink and the accept wink, and in a digital packet on the PRI.
>
> I believe you said yours were digital, but it's not sounding like that
> now...
no, its the mismatch between the analog DID device and the digital
signal process coming in from the T-1.
the fax device is a multitech DID modem - they work with only a
"analog DID trunk line which supports the inbound fax calls and a
regular loop-start line for standard inbound/outbound fax transmission."
however, apparently this is not what DID through T-1 is, which is why
i'm either looking for some sort of converter that is specific to and
retains the DID info, or a different modem (and perhaps hylafax, as
vsi does not support too many).
--- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ---
-Joe Chasan- Magnatech Business Systems, Inc.
joe at magnatechonline.com Hicksville, NY - USA
http://www.MagnatechOnline.com Tel.(516) 931-4444/Fax.(516) 931-1264
More information about the Filepro-list
mailing list