SCO UNIX and Filepro 4.05

[Cesar Baquerizo]

Thanks. VM seems like the way to go for hardware issues. 

Thanks again. 

Sent from my iPhone

> On Jul 23, 2020, at 12:52 PM, John Sica via Filepro-list <filepro-list at lists.celestial.com> wrote:
> 
> I don't know how the Filepro (or RW) Licensing works for this.  Others in the group could tell you possibly, but this ALL works in a Home Lab, and some in production environments.
> 
> 
> 1. Download VMware Workstation Pro Trial to a Win 10 Pro PC with an SSD ideally.
> 2. Install SCO Unix on a newly created VM.  I've installed 5.0.5 and 5.0.6 and 5.0.7.  5.0.6 has some issues with an Intel GB NIC, and Bill Campbell provided some very helpful tips on the 5.0.6 driver, but my Intel GB NIC would always time out every 10 to 15 seconds, so it was unreliable).
> 3. Install all the SCO Maintenance Packs.
> 4. Copy your Filepro Programs and data and config files, and it's a good idea to make your Fielpro UID the same on the new system as the old.
> 5. Copy your top level RW 8.X Programs and Data, and config files to the new instance.  RW 8.x on 5.0.5 will work the same on 5.0.6 or 5.0.7 as long as you copy all the files.
> 
> My RealWorld 8.X migration to Passport couldn't be accomplished because the export to exp files was going to take 3 1/2 weeks with the data we had, which wasn't even very much, but on the virtual instance, it took 11 minutes. (I did that instance on Virtualbox).
> 
> Once you get it all working, pay VMware the $275 for Workstation Pro or whatever they are asking for it today, or just download VMware Player and run it for free.
> 
> VMware Player is just like having only the Filepro Runtime programs, you can run it but you can't modify it.  The OSR 5 work can all be done with BackupEdge as well, but you still need the Maintenance Packs, and changing to a new hd controller is a little tricky, but I can send you the 2 or 3 steps to do that separately.  The steps are slightly different if you are using Microlite's RecoverEdge or Cactus Int. Rescue Ranger. In retrospect, it's easier to install from the SCO iso images.
> 
> I've contacted the Vendors and received licensing when they've requested it.  Microlite and FPtech are great to work with when it came to licensing, and my RealWorld setup was only in a lab environment.  If this is a production environment and it all works, you might consider a separate server and VMware 6.X or later.  I've only used VMware 6.7 update 3.  I'd guess it depends on how may users are going to connect.
> 
> Note:  I even got my old Arnet Fax server connected to the VMware hosts serial port to send faxes out com1.  Purchased a Digi Port single port server, but realized I didn't need it.
> 
> John
> 
> 
> 
> 
> 
> 
>> On 7/23/2020 5:48 AM, Cesar Baquerizo via Filepro-list wrote:
>> Good morning,
>> 
>>  
>> This is my every few years dilemma. Long story short.Due to possible lack of
>> support for SCO UNIX on newer hardware, Y2K patches in older software
>> (filepro and RealWorld), much more and, etc., etc. I have been recommending
>> that we move off to a modern system. However, things "currently work" so
>> that does not provide an "impending event".  FIlepro upgrade is not up for
>> consideration.
>> 
>>  
>> I am looking to see if anyone knows enough about the filepro Y2K "patch"
>> that can tell me how long we can expect filepro to work properly. I.e.
>> PFCMARK is currently set to 25. Is there a max number that this can be set
>> to? Any other issues anyone is aware of?
>> 
>>  
>> RealWorld Version 8 is another issue, but I assume this won't be discussed
>> here. That said if anyone has comments about this, feel free to respond
>> privately.
>> 
>>  
>> Thanks for any help.
>> 
>>  
>> Regards
>> ---------------------
>> 
>> 
>> 
>> 
>> 
>> 
>> ********************************************************************
>> 
>> This message and any attachments are solely for the intended recipient. If
>> you are not the intended recipient, disclosure, copying, use or distribution
>> of the information included in this message is prohibited. If you received
>> this message in error, please notify the sender and permanently delete.
>> 
>>  
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <http://mailman.celestial.com/pipermail/filepro-list/attachments/20200723/9f916a5c/attachment.html>
>> -------------- next part --------------
>> A non-text attachment was scrubbed...
>> Name: not available
>> Type: image/png
>> Size: 20179 bytes
>> Desc: not available
>> URL: <http://mailman.celestial.com/pipermail/filepro-list/attachments/20200723/9f916a5c/attachment.png>
>> _______________________________________________
>> Filepro-list mailing list
>> Filepro-list at lists.celestial.com
>> Subscribe/Unsubscribe/Subscription Changes
>> http://mailman.celestial.com/mailman/listinfo/filepro-list
> 
> 
> _______________________________________________
> Filepro-list mailing list
> Filepro-list at lists.celestial.com
> Subscribe/Unsubscribe/Subscription Changes
> http://mailman.celestial.com/mailman/listinfo/filepro-list