Windows 10 SCO Filepro issue

[Bill Campbell]

On Sat, Oct 27, 2018, Rod Caddy via Filepro-list wrote:
...
>Since this issue makes no since, I thought I would add some more to it. 
>After Brian's suggestions, I decided to go back and start from the beginning
>and redo all my tests and the additional things he suggested to make sure I
>was not losing my mind.  So here was my procedure and as a reminder what I am
>using:
>
>SCO 3.2.5.0.6 i386
>Filepro 4.05.08K7D4
>AlphaCom Terminal Emulation
>Windows 7 on all PCs except 1 which is Windows 10
>BTW, this is *not* a new user to the system.
>
...
>In this case the only difference I see is COLUMNS=80 and LINES=25.  Bare in
>mind, that this is the same user on the system and depending on which system
>I log in from, W7 or W10, one prints one does not.  Because I am logging into
>the same user account, I am using the same menus, the same config files, the
>same printers.  Everything is exactly the same as far as Unix, filePro, and
>AlphaCom are concerned.
>
>What I have not done is use a different emulator on the W10 PC, simply ran
>out of time.  I will be going back to the client on Monday to try that.  If
>that does not work I am truly at a loss. I welcome any feedback that you may
>be able to offer.

I'm not a Windows user, but it sounds to me that the problem is
likely with the AlphaCom terminal emulator as everthing else is
the same.  Have you checked to see if there's a newer version?

My clients running FilePro are usually running Anzio or Putty,
and I haven't heard of problems with either of these.

Bill
-- 
INTERNET:   bill at celestial.com  Bill Campbell; Celestial Software LLC
URL: http://www2.celestial.com/ PO Box 820; 6641 E. Mercer Way
Mobile:         (206) 947-5591  Mercer Island, WA 98040-0820
Fax:            (206) 232-9186  Skype: jwccsllc

The problem with socialism is that, sooner or later, you run out of
other peoples' money. -- Margaret Thatcher