empty records?

Robert Haussmann haussma at nextdimension.net
Tue Jul 10 15:22:46 PDT 2018 

Actually that's the change in behavior.  In earlier versions, if you opened *clerk to a new record and then did an EXIT, you wouldn't get the new record (quitting with an END, on the other hand, would result  in a new one).

Bob

> -----Original Message-----
> From: Filepro-list [mailto:filepro-list-
> bounces+haussma=nextdimension.net at lists.celestial.com] On Behalf Of
> Fairlight via Filepro-list
> Sent: Tuesday, July 10, 2018 5:49 PM
> To: filepro-list at lists.celestial.com
> Subject: Re: empty records?
> 
> The very act of sitting on a new blank record creates that record and leaves it
> there, though.  I forget the exact flags for this, but none of it had to do with
> END, EXIT, or anything of the sort.  In this case, you just needed to make sure
> the last thing you did was a DELETE.
> 
> That's how I was used to the blanks getting created.
> 
> m->
> 
> On Tue, Jul 10, 2018 at 05:39:18PM -0400, Jose Lerebours via Filepro-list thus
> spoke:
> > What if:
> >
> > 1. ESC ESC
> >
> > 2. screen "aa"; end
> >
> > 3. @wlfxx:if:then: end;
> >
> >
> > I think it has to do with how it gets there!
> >
> >
> >
> >
> > On 07/10/2018 10:38 AM, Richard D. Williams via Filepro-list wrote:
> > >Just a note, the "end" within a @wef @wlf @wuk @wbl does not cause a
> > >write.
> > >
> > >Richard D. Williams
> > >
> > >On 7/9/2018 1:38 PM, Jose Lerebours via Filepro-list wrote:
> > >>Just to make sure, at no point throughout the process the "END"
> > >>command is reached!?!
> > >>
> > >>You have checked your @wef / @wlf and "END" is NOT used ...
> > >>instead, you are using "screen" command to control cursor flow ...
> > >>
> > >>
> > >>
> > >>On 07/09/2018 02:29 PM, Robert Haussmann via Filepro-list wrote:
> > >>>Thanks--have actually tried both "exit" itself (no "end"), and
> > >>>"save;exit", but records gets created in both cases in the newer fP
> > >>>versions.
> > >>>
> > >>>Bob
> > >>>
> > >>>>-----Original Message-----
> > >>>>From: Filepro-list [mailto:filepro-list-
> > >>>>bounces+haussma=nextdimension.net at lists.celestial.com] On Behalf
> > >>>>bounces+Of
> > >>>>Jose Lerebours via Filepro-list
> > >>>>Sent: Monday, July 09, 2018 2:26 PM
> > >>>>To: filepro-list at lists.celestial.com
> > >>>>Subject: Re: empty records?
> > >>>>
> > >>>>It makes no difference if you populate a bunch of dummy fields or
> > >>>>real fields, "ESC ESC" and "END" will save the record ...
> > >>>>
> > >>>>In lieu of "END", use "screen" command to place cursor ...
> > >>>>the key here is to
> > >>>>never reach the "END" command if you do not wish to save blank
> > >>>>records (multiple per session very possibly).
> > >>>>
> > >>>>I figure you have an "X" to exit off the browse lookup or checking
> > >>>>for BRKY to see if user presses DEL DEL to break out ... in this
> > >>>>case, simply do "DELETE; EXIT" and see what happens.
> > >>>>
> > >>>>
> > >>>>
> > >>>>On 07/09/2018 01:56 PM, Bruce Easton via Filepro-list wrote:
> > >>>>>I needed to work on something related to this today, so I wanted
> > >>>>>to share my findings. Keep in my  - this is on Windows filepro
> > >>>>>version 5.6.06.  Originally I was trying to just run from @menu
> > >>>>>to browse another file and then popup update to collect data
> > >>>>>using a popup screen on the current file that only has dummy
> > >>>>>fields on it.  I had forgotten that you can't do this (filepro
> > >>>>>still thinks you're attempting to update something on the current
> > >>>>>record even though in this case it is just dummy fields that I
> > >>>>>want to ultimately write somewhere else - not to the current
> record).
> > >>>>>
> > >>>>>Ergo the need to use the add-record mode technique to stand on a
> > >>>>>new record.  So I changed the code to use @wef while standing on
> > >>>>>the new record (-xa flag from the script line), and it works OK,
> > >>>>>but what I noticed was this:  If I bail out before doing a popup
> > >>>>>or if I do the popup but cancel out of the popup (where
> > >>>>>processing leads to an "exit"
> > >>>>>command), the new record being used to stand on for this purpose
> > >>>>>is not saved, but if I save the popup (of dummy fields), and then
> > >>>>>bail out of the program with cancel, the new record is saved.
> > >>>>>This actually seems consistent from the point of view that
> > >>>>>filepro thinks that any popup update (of the type "-" for the
> > >>>>>current file)  is an attempt to update the current record whether
> > >>>>>it has only dummy fields or real fields on it.
> > >>>>>
> > >>>>>I'm not sure if this behavior is consistent with previous
> > >>>>>versions, but I know I'd want to see all of Bob's code to know if
> > >>>>>there was something different  - at least between versions 5.6 and
> 5.8.
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>>On 7/6/18 10:01 PM, Jose Lerebours via Filepro-list wrote:
> > >>>>>>I am blown away to hear this ... I've used this technique for as
> > >>>>>>long as I can remember and the norm, as I understand it is/was,
> > >>>>>>"exit"
> > >>>>>>prior to "end" does not save the record.
> > >>>>>>
> > >>>>>>This has proven very handy for many quick processing where as
> > >>>>>>
> > >>>>>>*aa in a screen and
> > >>>>>>
> > >>>>>>@wef* in a processing table (I normally use a unique processing
> > >>>>>>table for each need/task so -z and -y are always invoked)
> > >>>>>>
> > >>>>>>and parameter -xa to place in add record mode, which of course,
> > >>>>>>triggers @wef* ...
> > >>>>>>
> > >>>>>>
> > >>>>>>This is likely a BUG on this version - I just cannot imagine fp
> > >>>>>>changing this out of the blues without notice.   So, how much do
> > >>>>>>you get for finding a BUG?  A free upgrade or must you pay for
> > >>>>>>the version that addresses this BUG as well?  ;-)  lol   I say,
> > >>>>>>even if you are not "subscribed" for free upgrades, you are
> > >>>>>>entitle to a FREE ONE!
> > >>>>>>
> > >>>>>>Nice find / great work ... Thanks!!!
> > >>>>>>
> > >>>>>>
> > >>>>>>
> > >>>>>>On 07/06/2018 08:02 PM, Robert Haussmann via Filepro-list wrote:
> > >>>>>>>Yep, this is indeed what is happening. It goes to a different
> > >>>>>>>section where it writes out a text file and then exists.  But
> > >>>>>>>the conclusion is the same--whereas previous versions of fP
> > >>>>>>>didn't save the blank record on "exit", 5.8.00.15 does.
> > >>>>>>>
> > >>>>>>>Bob
> > >>>>>>>
> > >>>>>>>>-----Original Message-----
> > >>>>>>>>From: Filepro-list [mailto:filepro-list-
> > >>>>>>>>bounces+haussma=nextdimension.net at lists.celestial.com] On
> > >>>>>>>>bounces+Behalf
> > >>>>Of
> > >>>>>>>>Bruce Easton via Filepro-list
> > >>>>>>>>Sent: Friday, July 06, 2018 7:38 PM
> > >>>>>>>>To: filepro-list at lists.celestial.com
> > >>>>>>>>Subject: Re: empty records?
> > >>>>>>>>
> > >>>>>>>>Perhaps the execution is never getting back up to the start
> > >>>>>>>>label for some reason.  I would recommend setting up a session
> > >>>>>>>>in debug to see where it goes when the user saves their input.
> > >>>>>>>>
> > >>>>>>>>
> > >>>>>>>>On 7/6/18 7:32 PM, Robert Haussmann via Filepro-list wrote:
> > >>>>>>>>>Actually records aren't added through this method (I add the
> > >>>>>>>>>records via a
> > >>>>>>>>standard rclerk instance with a different screen number).
> > >>>>>>>>>Yes, you are absolutely right-- it would be better not to
> > >>>>>>>>>have to sit on any
> > >>>>>>>>record.  I haven't considered using @menu--I'll have to give
> > >>>>>>>>that some thought.
> > >>>>>>>>>Just tried the pushkey suggestion (both single and double),
> > >>>>>>>>>but no joy...
> > >>>>>>>>>
> > >>>>>>>>>Bob
> > >>>>>>>>>
> > >>>>>>>>>>-----Original Message-----
> > >>>>>>>>>>From: Filepro-list [mailto:filepro-list-
> > >>>>>>>>>>bounces+haussma=nextdimension.net at lists.celestial.com]
> On
> > >>>>Behalf
> > >>>>>>>>>>bounces+Of
> > >>>>>>>>>>Bruce Easton via Filepro-list
> > >>>>>>>>>>Sent: Friday, July 06, 2018 7:23 PM
> > >>>>>>>>>>To: filepro-list at lists.celestial.com
> > >>>>>>>>>>Subject: Re: empty records?
> > >>>>>>>>>>
> > >>>>>>>>>>The technique used there begs more questions. (I would
> > >>>>>>>>>>wonder, for instance, what happens to the record after it's
> > >>>>>>>>>>been added - what is it used for and what it's supposed to
> > >>>>>>>>>>retain..   Is it possible that it would be better designed
> > >>>>>>>>>>to not sit on any record, say from @menu, while it's
> > >>>>>>>>>>verifying that it has acceptable input...)
> > >>>>>>>>>>
> > >>>>>>>>>>But I see your point.  It's odd that it behaves differently now.
> > >>>>>>>>>>You could try this instead for the first line:
> > >>>>>>>>>>
> > >>>>>>>>>>start  If: 1 eq ""
> > >>>>>>>>>>        Then: pushkey "[BRKY][BRKY]"; end   '(or just one
> > >>>>>>>>>>BRKY for Windows I
> > >>>>>>>>>>think)
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>On 7/6/18 6:59 PM, Robert Haussmann via Filepro-list wrote:
> > >>>>>>>>>>>Yes, I use "start" as the label. This code as actually
> > >>>>>>>>>>>written like
> > >>>>>>>>>>>2 decades(!)
> > >>>>>>>>>>ago, so I'm having a little difficulty remembering.  But it
> > >>>>>>>>>>looks like the general flow is:
> > >>>>>>>>>>>@wef1 label ensures we are on the right screen #, if so go
> > >>>>>>>>>>>to the "login"
> > >>>>>>>>>>label, if not end:
> > >>>>>>>>>>>12  -------   -   -   - -
> > >>>>>>>>>>>@wef1  ? If: @sn eq "9"
> > >>>>>>>>>>>           Then: goto login
> > >>>>>>>>>>>     13  -------   -   -   -   -
> > >>>>>>>>>>>           ? If:
> > >>>>>>>>>>>           Then: end
> > >>>>>>>>>>>     14  -------   -   -   -   -
> > >>>>>>>>>>>
> > >>>>>>>>>>>"login" is where we input username/password and check
> that
> > >>>>>>>>>>>they are
> > >>>>>>>>>>valid.
> > >>>>>>>>>>>The actual processing itself (after some comments and
> > >>>>>>>>>>>variable
> > >>>>>>>>>>declarations) is here (the "Start" label):
> > >>>>>>>>>>>start  ? If: 1 eq ""
> > >>>>>>>>>>>           Then:  exit 'do not save blank records
> > >>>>>>>>>>>     11  -------   -   -   -   -   -   -   - -   - -   -
> > >>>>>>>>>>>-
> > >>>>>>>>>>>-   -   -   -
> > >>>>>>>>>>>
> > >>>>>>>>>>>>-----Original Message-----
> > >>>>>>>>>>>>From: Filepro-list [mailto:filepro-list-
> > >>>>>>>>>>>>bounces+haussma=nextdimension.net at lists.celestial.com]
> On
> > >>>>>>>>>>>>bounces+Behalf
> > >>>>>>>>Of
> > >>>>>>>>>>>>Bruce Easton via Filepro-list
> > >>>>>>>>>>>>Sent: Friday, July 06, 2018 6:55 PM
> > >>>>>>>>>>>>To: filepro-list at lists.celestial.com
> > >>>>>>>>>>>>Subject: Re: empty records?
> > >>>>>>>>>>>>
> > >>>>>>>>>>>>Just curious - is there a label on that first line? (More
> > >>>>>>>>>>>>importantly a filepro reserved word event trigger?) I'm
> > >>>>>>>>>>>>just wondering how the program is supposed to test that
> > >>>>>>>>>>>>first line prior to an "SAVE" or "CANCEL" coming
> > >>>>>>>>>>from
> > >>>>>>>>>>>>the user or the program...
> > >>>>>>>>>>>>
> > >>>>>>>>>>>>
> > >>>>>>>>>>>>On 7/6/18 6:46 PM, Robert Haussmann via Filepro-list
> wrote:
> > >>>>>>>>>>>>>Bruce and Jose--thank you both for your suggestions.  I
> > >>>>>>>>>>>>>think I found out
> > >>>>>>>>>>>>what's going on.  The one database is used for security
> > >>>>>>>>>>>>(contains a list of usernames, pw's and access rights).
> > >>>>>>>>>>>>We go into this with "rclerk security -
> > >>>>>>>>>>s9 -
> > >>>>>>>>>>>>xa -d", and then the processing inputs
> username+password.
> > >>>>>>>>>>>>The first line
> > >>>>>>>>>>in
> > >>>>>>>>>>>>input processing is:
> > >>>>>>>>>>>>>If: 1 eq ""
> > >>>>>>>>>>>>>Then: exit
> > >>>>>>>>>>>>>
> > >>>>>>>>>>>>>Well, it seems that in 5.8.00.08, things work as
> > >>>>>>>>>>>>>expected. But in
> > >>>>>>>>>>5.8.00.15,
> > >>>>>>>>>>>>this results in a new record being saved. (not sure when
> > >>>>>>>>>>>>this behavior was introduced, as I don't have the interim
> > >>>>>>>>>>>>versions available
> > >>>>>>>>to test.).
> > >>>>>>>>>>>>>Bob
> > >>>>>>>>>>>>>
> > >>>>>>>>>>>>>>-----Original Message-----
> > >>>>>>>>>>>>>>From: Filepro-list [mailto:filepro-list-
> >
> >>>>>>>>>>>>>>bounces+haussma=nextdimension.net at lists.celestial.com
> ]
> > >>>>>>>>>>>>>>bounces+On
> > >>>>>>>>Behalf
> > >>>>>>>>>>Of
> > >>>>>>>>>>>>>>Robert Haussmann via Filepro-list
> > >>>>>>>>>>>>>>Sent: Friday, July 06, 2018 6:32 PM
> > >>>>>>>>>>>>>>To: Bruce Easton <bruce at stn.com>; 'Filepro List'
> > >>>>>>>>>>>>>><filepro-list at celestial.com>
> > >>>>>>>>>>>>>>Subject: RE: empty records?
> > >>>>>>>>>>>>>>
> > >>>>>>>>>>>>>>Thanks--I've definitely run into this before (where
> > >>>>>>>>>>>>>>basically it keeps adding records until you kill the
> > >>>>>>>>>>>>>>process). That's not the case here--these are getting
> > >>>>>>>>>>>>>>added one at a time it seems (in a day I might see
> > >>>>>>>>>>>>>>anywhere between 20 and
> > >>>>>>>>>>>>>>200 new records).  It is the strangest thing.  I have to
> > >>>>>>>>>>>>>>believe it is related to the updated version....
> > >>>>>>>>>>>>>>
> > >>>>>>>>>>>>>>Bob
> > >>>>>>>>>>>>>>
> > >>>>>>>>>>>>>>>>-----Original Message-----
> > >>>>>>>>>>>>>>>>From: Filepro-list [mailto:filepro-list-
> >
> >>>>>>>>>>>>>>>>bounces+haussma=nextdimension.net at lists.celestial.c
> om]
> > >>>>On
> > >>>>>>>>>>Behalf
> > >>>>>>>>>>>>Of
> > >>>>>>>>>>>>>>>>Bruce Easton via Filepro-list
> > >>>>>>>>>>>>>>>>Sent: Friday, July 06, 2018 6:23 PM
> > >>>>>>>>>>>>>>>>To: filepro-list at lists.celestial.com
> > >>>>>>>>>>>>>>>>Subject: Re: empty records?
> > >>>>>>>>>>>>>>>>
> > >>>>>>>>>>>>>>>>The only thing I've seen that can cause this if you
> > >>>>>>>>>>>>>>>>have screens that have no field on them that can be
> > >>>>>>>>>>>>>>>>updated, and they you allow access to users to get to
> > >>>>>>>>>>>>>>>>any of those screens with
> > >>>>>>>>'Add Records'
> > >>>>>>>>>>mode.
> > >>>>>>>>>>>>>>>>Bruce
> > >>>>>>>>>>>>>>>>
> > >>>>>>>>>>>>>>>>
> > >>>>>>>>>>>>>>>>On 7/6/18 6:17 PM, Robert Haussmann via Filepro-list
> > >>>>>>>>>>>>>>>>wrote:
> > >>>>>>>>>>>>>>>>>Has anyone encountered an issue with fP in which
> > >>>>>>>>>>>>>>>>>completely
> > >>>>>>>>>>empty
> > >>>>>>>>>>>>>>>>records are created seemingly at random?  We are
> > >>>>>>>>>>>>>>>>seeing what appears to be phantom blank records
> > >>>>>>>>>>>>>>>>getting inserted into specific filepro
> > >>>>>>>>>>>>>>>databases.
> > >>>>>>>>>>>>>>>>These dbs have run for years with no problem-the
> only
> > >>>>>>>>>>>>>>>>change recently was updating from 5.8.00.03 to
> > >>>>>>>>>>>>>>>>5.8.00.15 (Windows
> > >>>>>>>>version).
> > >>>>>>>>>>>>>>>>I'm honestly not even sure where to start looking-as I
> > >>>>>>>>>>>>>>>>noted these apps ran for years (decades, really)
> > >>>>>>>>>>>>>>>>without
> > >>>>issue.
> > >>>>>>>>>>>>>>>>>Thanks,
> > >>>>>>>>>>>>>>>>>Bob Haussmann
> > >>>>>>>>>>>>>>>>>-------------- next part
> > >>>>>>>>>>>>>>>>>-------------- An HTML attachment was scrubbed...
> > >>>>>>>>>>>>>>>>>URL:
> > >>>>>>>>>>>>>>>>><http://mailman.celestial.com/pipermail/filepro-
> > >>>>>>>>>>list/attachments/2
> > >>>>>>>>>>>>>>>>>01
> > >>>>>>>>>>>>>>>>>80
> > >>>>>>>>>>>>>>>>>706/dda5e6f2/attachment.html>
> > >>>>>>>>>>>>>>>>>
> > >>>>_______________________________________________
> > >>>>>>>>>>>>>>>>>Filepro-list mailing list
> > >>>>>>>>>>>>>>>>>Filepro-list at lists.celestial.com
> > >>>>>>>>>>>>>>>>>Subscribe/Unsubscribe/Subscription Changes
> >
> >>>>>>>>>>>>>>>>>http://mailman.celestial.com/mailman/listinfo/filepro
> > >>>>>>>>>>>>>>>>>-list
> > >>>>>>>>>>>>>>>>>
> > >>>>>>>>>>>>>>>>>
> > >>>>>>>>>>>>>>>>---
> > >>>>>>>>>>>>>>>>This email has been checked for viruses by Avast
> > >>>>>>>>>>>>>>>>antivirus
> > >>>>>>>>software.
> > >>>>>>>>>>>>>>>>https://www.avast.com/antivirus
> > >>>>>>>>>>>>>>>>
> > >>>>>>>>>>>>>>>>
> > >>>>_______________________________________________
> > >>>>>>>>>>>>>>>>Filepro-list mailing list
> > >>>>>>>>>>>>>>>>Filepro-list at lists.celestial.com
> > >>>>>>>>>>>>>>>>Subscribe/Unsubscribe/Subscription Changes
> >
> >>>>>>>>>>>>>>>>http://mailman.celestial.com/mailman/listinfo/filepro-
> > >>>>>>>>>>>>>>>>list
> >
> >>>>>>>>>>>>>>____________________________________________
> ___
> > >>>>>>>>>>>>>>Filepro-list mailing list
> > >>>>>>>>>>>>>>Filepro-list at lists.celestial.com
> > >>>>>>>>>>>>>>Subscribe/Unsubscribe/Subscription Changes
> > >>>>>>>>>>>>>>http://mailman.celestial.com/mailman/listinfo/filepro-li
> > >>>>>>>>>>>>>>st
> >
> >>>>>>>>>>>>>_____________________________________________
> __
> > >>>>>>>>>>>>>Filepro-list mailing list
> > >>>>>>>>>>>>>Filepro-list at lists.celestial.com
> > >>>>>>>>>>>>>Subscribe/Unsubscribe/Subscription Changes
> > >>>>>>>>>>>>>http://mailman.celestial.com/mailman/listinfo/filepro-lis
> > >>>>>>>>>>>>>t
> > >>>>>>>>>>>>>
> >
> >>>>>>>>>>>>______________________________________________
> _
> > >>>>>>>>>>>>Filepro-list mailing list
> > >>>>>>>>>>>>Filepro-list at lists.celestial.com
> > >>>>>>>>>>>>Subscribe/Unsubscribe/Subscription Changes
> > >>>>>>>>>>>>http://mailman.celestial.com/mailman/listinfo/filepro-list
> >
> >>>>>>>>>>>_______________________________________________
> > >>>>>>>>>>>Filepro-list mailing list
> > >>>>>>>>>>>Filepro-list at lists.celestial.com
> > >>>>>>>>>>>Subscribe/Unsubscribe/Subscription Changes
> > >>>>>>>>>>>http://mailman.celestial.com/mailman/listinfo/filepro-list
> > >>>>>>>>>>_______________________________________________
> > >>>>>>>>>>Filepro-list mailing list
> > >>>>>>>>>>Filepro-list at lists.celestial.com
> > >>>>>>>>>>Subscribe/Unsubscribe/Subscription Changes
> > >>>>>>>>>>http://mailman.celestial.com/mailman/listinfo/filepro-list
> > >>>>>>>>>_______________________________________________
> > >>>>>>>>>Filepro-list mailing list
> > >>>>>>>>>Filepro-list at lists.celestial.com
> > >>>>>>>>>Subscribe/Unsubscribe/Subscription Changes
> > >>>>>>>>>http://mailman.celestial.com/mailman/listinfo/filepro-list
> > >>>>>>>>
> > >>>>>>>>_______________________________________________
> > >>>>>>>>Filepro-list mailing list
> > >>>>>>>>Filepro-list at lists.celestial.com
> > >>>>>>>>Subscribe/Unsubscribe/Subscription Changes
> > >>>>>>>>http://mailman.celestial.com/mailman/listinfo/filepro-list
> > >>>>>>>_______________________________________________
> > >>>>>>>Filepro-list mailing list
> > >>>>>>>Filepro-list at lists.celestial.com
> > >>>>>>>Subscribe/Unsubscribe/Subscription Changes
> > >>>>>>>http://mailman.celestial.com/mailman/listinfo/filepro-list
> > >>>>>>_______________________________________________
> > >>>>>>Filepro-list mailing list
> > >>>>>>Filepro-list at lists.celestial.com
> > >>>>>>Subscribe/Unsubscribe/Subscription Changes
> > >>>>>>http://mailman.celestial.com/mailman/listinfo/filepro-list
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>>---
> > >>>>>This email has been checked for viruses by Avast antivirus software.
> > >>>>>https://www.avast.com/antivirus
> > >>>>>
> > >>>>>_______________________________________________
> > >>>>>Filepro-list mailing list
> > >>>>>Filepro-list at lists.celestial.com
> > >>>>>Subscribe/Unsubscribe/Subscription Changes
> > >>>>>http://mailman.celestial.com/mailman/listinfo/filepro-list
> > >>>>_______________________________________________
> > >>>>Filepro-list mailing list
> > >>>>Filepro-list at lists.celestial.com
> > >>>>Subscribe/Unsubscribe/Subscription Changes
> > >>>>http://mailman.celestial.com/mailman/listinfo/filepro-list
> > >>>_______________________________________________
> > >>>Filepro-list mailing list
> > >>>Filepro-list at lists.celestial.com
> > >>>Subscribe/Unsubscribe/Subscription Changes
> > >>>http://mailman.celestial.com/mailman/listinfo/filepro-list
> > >>
> > >>_______________________________________________
> > >>Filepro-list mailing list
> > >>Filepro-list at lists.celestial.com
> > >>Subscribe/Unsubscribe/Subscription Changes
> > >>http://mailman.celestial.com/mailman/listinfo/filepro-list
> > >>
> > >>
> > >>---
> > >>This email has been checked for viruses by AVG.
> > >>https://www.avg.com
> > >
> > >_______________________________________________
> > >Filepro-list mailing list
> > >Filepro-list at lists.celestial.com
> > >Subscribe/Unsubscribe/Subscription Changes
> > >http://mailman.celestial.com/mailman/listinfo/filepro-list
> >
> > _______________________________________________
> > Filepro-list mailing list
> > Filepro-list at lists.celestial.com
> > Subscribe/Unsubscribe/Subscription Changes
> > http://mailman.celestial.com/mailman/listinfo/filepro-list
> 
> --
> Audio panton, cogito singularis.
> _______________________________________________
> Filepro-list mailing list
> Filepro-list at lists.celestial.com
> Subscribe/Unsubscribe/Subscription Changes
> http://mailman.celestial.com/mailman/listinfo/filepro-list

More information about the Filepro-list mailing list