5.7.0.2D4 doublespacing printouts after hardware replacement

[Jay Ashworth]

Client box had a fan failure, had to replace the mobo.  No parallel for their
Epson DFX-8000 monster-printer.  Tried a PCIe but it wouldn't print anything -
I suspect that the Epson hates ECP (as lots of old parallel printers did),
and there's no way to turn that off (disable_ecp isn't in my parport_pc).

So we put in a Prolific USB Parallel cord.  Prints, but while lp printed 
files are fine, filePro now doublespaces everything.  There's a DIP switch
for this on the printer to tell it to supply LFs when receiving a CR, but it
was already on, and turning it off changed nothing.  Yes, I power cycled.

There *used* to be, I thought, a page of settable knobs for each printer/type
in filePro, but I can't find it.  I thought it was an Fkey in pmaint, but
nope.

Any ideas what I'm misremembering, hivemind?  :-)

Cheers,
-- jra

-- 
Jay R. Ashworth                  Baylink                       jra at baylink.com
Designer                     The Things I Think                       RFC 2100
Ashworth & Associates       http://www.bcp38.info          2000 Land Rover DII
St Petersburg FL USA      BCP38: Ask For It By Name!           +1 727 647 1274