raspberry Pi

[Doug Luurs]

Henry .. I've got a pi too, and Ken is correct.  The pi runs a ARM processor which has a RISC type instruction set.
The x86 is completely different, so running any x86 code "As-is" would not be possible.  So even if you are running
a FreeBSD O/S, it's been compiled to use that RISC instruction set.  Ken / fpTech would need to completely recompile
fP with the ARM instruction set, and even then, the 512k memory limit on a pi would make running fP painful if at 
all possible.

___________________________________________________________________________
Doug Luurs
Senior Systems Analyst / Programmer

Amphenol / BORISCH Technologies
4511 East Paris SE
Grand Rapids, MI 49512-5314
(616) 554-9820   x1143



-----Original Message-----
From: filepro-list-bounces+doug.luurs=gmail.com at lists.celestial.com [mailto:filepro-list-bounces+doug.luurs=gmail.com at lists.celestial.com] On Behalf Of Kenneth Brody
Sent: Tuesday, May 07, 2013 2:42 PM
To: Henry Arredondo
Cc: filepro-list at lists.celestial.com
Subject: Re: raspberry Pi

On 5/7/2013 1:31 PM, Henry Arredondo wrote:
[...]
>> I installed freeBSD on the pi and works like a charm!, then I 
>> installed filepro 5.7 evaluation for freeBSD and now  I'm getting an 
>> error : Exec format error,  is that a license issue ? or the actual 
>> exec command syntax on this release ?
[...]
> I sent you the ssh login information for the raspberry pi , the 
> filepro for FreeBSD is in the /root folder ( 2 tarballs) you can 
> delete / install / do anything you want there is no information 
> whatsoever to worry about, to reimage the R-pi takes 2 minutes if 
> something goes wrong

You didn't answer my questions, but the short answer is that the computer uses an ARM CPU, which as far as I know is not compatible with the x86 line of CPUs.

--
Kenneth Brody
_______________________________________________
Filepro-list mailing list
Filepro-list at lists.celestial.com
Subscribe/Unsubscribe/Subscription Changes http://mailman.celestial.com/mailman/listinfo/filepro-list


-- 
These commodities/technical data, including attachments, are controlled under
the United States Export Administration Regulations (EAR) and the International
Traffic in Arms Regulations (ITAR). This information may not be exported to a
foreign person, either in the U.S. or abroad, without the proper authorization
of the U.S. Department of State or the U.S. Department of Commerce. Prior to
distributing, please contact Ampehnol Borisch Technologies to obtain
related information for commodity classification and jurisdiction as well as
end users.

This E-mail, including any attachments, should be considered confidential and
proprietary information. Further, this information is intended solely for use
by the individual to whom it is addressed. If you received this E-mail in
error, please notify the sender, do not disclose its contents to others, and
delete it from your system.  Any other use of this E-mail and/or attachments is
prohibited.  This message is not meant to constitute an electronic signature or
intent to contract electronically.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.celestial.com/pipermail/filepro-list/attachments/20130507/72044f10/attachment.html