- lookup question
Robert T. Repko
rtr at rsquared.com
Fri Jul 19 13:54:11 PDT 2013
@rs or @ts
-----Original Message-----
From: filepro-list-bounces+rtr=rsquared.com at lists.celestial.com [mailto:filepro-list-bounces+rtr=rsquared.com at lists.celestial.com] On Behalf Of Richard Kreiss
Sent: Friday, July 19, 2013 4:20 PM
To: 'Bruce Easton'; filepro-list at lists.celestial.com
Subject: RE: - lookup question
Does anyone know if the is a system field or a system array that would hold the record count so I can get it in processing?
Richard
> -----Original Message-----
> From: filepro-list-bounces+rkreiss=verizon.net at lists.celestial.com
> [mailto:filepro-list-bounces+rkreiss=verizon.net at lists.celestial.com]
> On Behalf Of Bruce Easton
> Sent: Friday, July 19, 2013 12:12 PM
> To: filepro-list at lists.celestial.com
> Subject: Re: - lookup question
>
> Richard, for a record number lookup, I believe the only way to speed
> things up for this case would be if you always had a saved record
> number "99999999" on file (not deleted). Alternatively, you could keep an
> automatic index built on @rn for that file and then use "lookup -
> k=nr i=? -nl", where ? is the index letter built on @rn, to skip to the end.
>
> Bruce
>
> On 7/19/13 11:21 AM, Richard Kreiss wrote:
> > I have a routine that uses a - lookup using a record number. The
> > record
> numbers to use are located in a file which the -v selection process
> reads in to an array and then loops through the array to select the record.
> >
> > When the loop hits an empty array element I set the lookup value to
> "99999999" but the process continues to run through all of the records.
> >
> > Is there any way, using a record number lookup in a select process
> > to have
> the selection end without running through all of the records?
> >
> > Processing below:
> >
> > Richard Kreiss
> > GCC Consulting
> >
> > Office: 410-653-2813
> >
> > 8 ------- - - - - - - - - - - - - - - - -
> > ◄ If:
> > Then: dim recno(2000)(8,.0)
> > 9 ------- - - - - - - - - - - - - - - - -
> > ◄ If: ct = ""
> > Then: ct(2,.0,g)="1";rn(8,.0) ="1";GOSUB get_num
> > 10 ------- - - - - - - - - - - - - - - - -
> > ◄ If: recno[ct] ge "1"
> > Then: nr=recno[ct]
> > 11 ------- - - - - - - - - - - - - - - - -
> > ◄ If: recno[ct] = ""
> > Then: nr(8,.0,g)="99999999"
> > 12 ------- - - - - - - - - - - - - - - - -
> > ◄ If:
> > Then: lookup - r=nr -n
> > 13 ------- - - - - - - - - - - - - - - - -
> > ◄ If: not -
> > Then: END
> > 14 ------- - - - - - - - - - - - - - - - -
> > ◄ If:
> > Then: select;SHOWTOCOL("10","50") "Records Selected"<ct
> > 15 ------- - - - - - - - - - - - - - - - -
> > ◄ If:
> > Then: select;ct=ct+"1"
> > 16 ------- - - - - - - - - - - - - - - - -
> > ◄ If:
> > Then: END
> > 17 ------- - - - - - - - - - - - - - - - -
> > get_num◄ If:
> '***********************************************************
> ****
> > Then: '* read in values from fix_cards
> > 18 ------- - - - - - - - - - - - - - - - -
> > ◄ If:
> > Then: dim rifka(2);ro(2,.0)="2"; cl(2,.0)="1"
> > 19 ------- - - - - - - - - - - - - - - - -
> > ◄ If:
> > Then: CLS("1","4");SHOWCTR("1") "Reposting Transactions"
> > 20 ------- - - - - - - - - - - - - - - - -
> > ◄ If:
> > Then: rifka["1"]="Select Option"
> > 21 ------- - - - - - - - - - - - - - - - -
> > ◄ If:
> > Then: rifka["2"]="1: Begin"
> > 22 ------- - - - - - - - - - - - - - - - -
> > ◄ If:
> > Then: menu rifka begin,done
> > 23 ------- - - - - - - - - - - - - - - - -
> > done ◄ If:
> > Then: EXIT
> > 24 ------- - - - - - - - - - - - - - - - -
> > begin ◄ If:
> > Then:
> > 25 ------- - - - - - - - - - - - - - - - -
> > ◄ If:
> > Then: input popup dw(10,mdyy/) "Enter Date Wanted\nPress \kZ
> > for
> \r"<@t4<"\r -> "
> > 26 ------- - - - - - - - - - - - - - - - -
> > ◄ If: @sk = "BRKY"
> > Then: GOTO get_num
> > 27 ------- - - - - - - - - - - - - - - - -
> > ◄ If: dw = ""
> > Then: dw=@t4
> > 28 ------- - - - - - - - - - - - - - - - -
> > ◄ If: '* index C is built on date and record #
> > Then: lookup xcard = fix_cards K=dw i=C -Nx
> > 29 ------- - - - - - - - - - - - - - - - -
> > loop_xc◄ If: NOT xcard and ct = "1"
> > Then: END
> > 30 ------- - - - - - - - - - - - - - - - -
> > ◄ If: NOT xcard and ct gt "1"
> > Then: ct="1";RETURN
> > 31 ------- - - - - - - - - - - - - - - - -
> > ◄ If:
> > Then: recno[ct]=xcard(2)
> > 32 ------- - - - - - - - - - - - - - - - -
> > ◄ If:
> > Then: SHOW(ro,cl) recno[ct]
> > 33 ------- - - - - - - - - - - - - - - - -
> > ◄ If: cl le "72"
> > Then: cl=cl+"9"
> > 34 ------- - - - - - - - - - - - - - - - -
> > ◄ If: cl gt "73"
> > Then: ro=ro+"1";cl="1"
> > 35 ------- - - - - - - - - - - - - - - - -
> > ◄ If: ro ge "20"
> > Then: ro="2";cl="1";CLS ("2","18")
> > 36 ------- - - - - - - - - - - - - - - - -
> > ◄ If: ct gt "2000"
> > Then: ct="1";RETURN
> > 37 ------- - - - - - - - - - - - - - - - -
> > ◄ If: ct lt "2000"
> > Then: ct=ct+"1";GETNEXT XCARD
> > 38 ------- - - - - - - - - - - - - - - - -
> > ◄ If:
> > Then: goto LOOP_XC
> > _______________________________________________
> > Filepro-list mailing list
> > Filepro-list at lists.celestial.com
> > Subscribe/Unsubscribe/Subscription Changes
> > http://mailman.celestial.com/mailman/listinfo/filepro-list
>
>
> _______________________________________________
> Filepro-list mailing list
> Filepro-list at lists.celestial.com
> Subscribe/Unsubscribe/Subscription Changes
> http://mailman.celestial.com/mailman/listinfo/filepro-list
_______________________________________________
Filepro-list mailing list
Filepro-list at lists.celestial.com
Subscribe/Unsubscribe/Subscription Changes http://mailman.celestial.com/mailman/listinfo/filepro-list
This email was scanned for viruses by ClamAV AntiVirus.
More information about the Filepro-list
mailing list