DIM and Associated Fields (GRX)

John Esak john at valar.com
Tue Dec 16 14:11:25 PST 2008


Incidentally, I mentioned that the dimension and the associated field group
have to match up in number of elements.... But the associated field group
does not have to be contiguous... Id don't mean that.  In your case, you
would just build an 8 element array starting at a1) and filepro will figure
the thing out for you no matter where it finds the a1) elements.

John
 

> -----Original Message-----
> From: filepro-list-bounces+john=valar.com at lists.celestial.com 
> [mailto:filepro-list-bounces+john=valar.com at lists.celestial.co
m] On Behalf Of John Esak
> Sent: Tuesday, December 16, 2008 5:06 PM
> To: 'Chris Sellitto'; filepro-list at lists.celestial.com
> Cc: 'filePro'
> Subject: RE: DIM and Associated Fields (GRX)
> 
> I think your problem might be that there are only 8 fields in the a1)
> associated field group.  (the others are a2)).... So, the array you've
> overlaid on them is stepping you out of bounds.
> 
> I haven't looked closely at your code... Just read what you 
> wrote and that
> sounded wrong.
> 
> But, on the whole, yes, you can build an array over an 
> associated field
> group... And I suppose over an associated field group in a 
> lookup file as
> well.  (never did this, but don't see why it wouldn't work if 
> the fields and
> elements match up in number).
> 
> John Esak
> 
> 
> > -----Original Message-----
> > From: filepro-list-bounces+john=valar.com at lists.celestial.com 
> > [mailto:filepro-list-bounces+john=valar.com at lists.celestial.co
> m] On Behalf Of Chris Sellitto
> > Sent: Tuesday, December 16, 2008 4:07 PM
> > To: filepro-list at lists.celestial.com
> > Subject: DIM and Associated Fields (GRX)
> > 
> > I am dealing with a file that somebody else created.  The 
> > layout is as follows.
> > 
> >                        D E F I N E   P R O C E S S I N G      
> >          5.0.14RN9
> > --------------------------------------------------------------
> > ------------------
> >   1- skid                                 16- a1)IndCartType1 
> >              31- a1)IndCartType12
> >   2- wholesaler #                 17- a1)IndCartType2         
> >      32- a1)IndCartType13
> >   3- curr location                  18- a1)IndCartType3       
> >        33- a1)IndCartType14
> >   4- prev location                  19- a1)IndCartType4       
> >       34- a2)IndCartType5Count
> >   5- status                              20- 
> > a2)IndCartType1Count  35- a2)IndCartType6Count
> >   6- last activity                      21- 
> > a2)IndCartType2Count  36- a2)IndCartType7Count
> >   7-               date                   22- 
> > a2)IndCartType3Count  37- a2)IndCartType8Count
> >   8-               time                   23- 
> > a2)IndCartType4Count  38- a2)IndCartType9Count
> >   9-               user                   24- a1)IndCartType5 
> >            39- a2)IndCartType10Count
> >  10- wholesaler name        25- a1)IndCartType6            
> > 40- a2)IndCartType11Count
> >  11- front/rear                        26- a1)IndCartType7    
> >         41- a2)IndCartType12Count
> >  12- division                          27- a1)IndCartType8    
> >         42- a2)IndCartType13Count
> >  13- # boxes                          28- a1)IndCartType9     
> >        43- a2)IndCartType14Count
> >  14- # boxes processed     29- a1)IndCartType10
> >  15- mailer number             30- a1)IndCartType11
> > 
> > My Question is:
> > 
> > Can I build a 14 element array on a1).  For instance, is the 
> > following a valid statement?
> > 
> > DIM IndCartType(14)(8,LJ):skid(a1))
> > 
> > Knowing that a valid lookup to the file using "skid" as an 
> > alias was performed.
> > 
> > When I run a syntax check it does not give me an error.
> > 
> > When I run the process I receive the following.....
> > 
> > 
> > *** A filePro Error Has Occurred ***
> > 
> > On File: /filepro/gr_skids/index.A
> > 
> > Output Processing
> > Line Number: 194
> > (IndCartType(x) co Indate_BoxSkid2) and (IndLoopOccur eq "1")
> > IndCartTypeCount(x)=IndCartTypeCount(x)+"1";FoundIndBox="Y";go
> > to LupDun3
> > 
> > 
> > Reference to a field that doesn't exist.
> > 
> > 
> >  Press  H -Hardcopy  ?--+ -Continue
> > 
> > 
> > I am assuming it means that IndCartType(x) is generating this error.
> > 
> > - X is defined as (2,.0)
> > 
> > Any suggestions/solutions would be greatly appreciated.
> > 
> > Thank you
> > 
> > Christopher Sellitto
> > VP Computer Operations
> > Guaranteed Returns
> > 100 Colin Drive
> > Holbrook, NY 11741
> > (631) 689-0191 x132
> > mailto:sellich at guaranteedreturns.com
> > _______________________________________________
> > Filepro-list mailing list
> > Filepro-list at lists.celestial.com
> > http://mailman.celestial.com/mailman/listinfo/filepro-list
> > 
> 
> _______________________________________________
> Filepro-list mailing list
> Filepro-list at lists.celestial.com
> http://mailman.celestial.com/mailman/listinfo/filepro-list
> 



More information about the Filepro-list mailing list