Form question

[Don Coleman]

John:

I thought the same thing you're thinking but have checked the paths,
table names, etc. three times.  I'll give it a go again on Monday. 
The odd thing is the two new variable definitions I added to the
output processing table are there and the variables have the data I'm
expecting.  I'm just not seeing them on the printed (or printed to
file) output.  Back to it on Monday.

Also, you mentioned that Ken thought the same thing but I didn't see
his message come across.  If you still have it could you forward it
to
me?  I should listen to most anything (grin, as Laura would say) he
has to say.

Don Coleman 

-------- Original Message --------

==> From: "John Esak" <john at valar.com>
==> Date: Fri, 24 Aug 2007 22:13:58 -0400

 Try this...

Make a new prc table (which you say you did already... but go again).
 Put on it...

       if: then: end @keyT  if: then: aa="fred" if: then: add all the
stuff you need for your new form if: then: form "newformname";  end

Put the AA on your new form with *aa somewhere... and see if when you
press the T key does the form contain "fred" on it.

I'm kind of leaning with Ken that you are calling the wrong form.
This
will prove it out two ways.

Good luck.

John

 > -----Original Message----- > From:
filepro-list-bounces john=valar.com at lists.celestial.com >
[mailto:filepro-list-bounces john=valar.com at lists.celestial.com]On >
Behalf Of Don Coleman > Sent: Friday, August 24, 2007 3:15 PM > To:
filepro-list at lists.celestial.com > Subject: Form question > > > List:
> > Pulling my hair out 'cause I know I'm missing something.  I have a
"clerk > process which calls a form and prints it.  I need to add two
> fields to this > form which is already in use.  So I copy the input
table and the form to > their own unique files so as to not interfere
with current > production while > I ensure the alignment and all are
correct.  I am running both the input > table and the form from
dclerk/dreport with debug and see the > correct input > table and
correct form being called.  My only problem is the fields I >
re-arranged on the new form are not in their new positions, they are
still > in the old positions.  I also set the output to print to file
and the new > fields are in the old positions as well.  I remember
seeing this behavior > before but always found my mistake, usually I
wasn't "calling" the correct > path to my revised output.  Everything
looks good (except my new fields). > > Any suggestions. > > Don
Coleman > Donald G. Coleman, Consultant > 402 Andrew Circle >
Indiana,
PA 15701 > dcoleman at dgcreact.com > (724) 349-6302 > > > >
_______________________________________________ > Filepro-list
mailing
list > Filepro-list at lists.celestial.com >
http://mailman.celestial.com/mailman/listinfo/filepro-list