Printing Full Page 1098, 1099

[Kenneth Brody]

Quoting Del (Mon, 20 Aug 2007 11:48:13 -0400):

> Hi:
>
> I have a client that wants to switch from printing 1098 and 1099 on   
> dot matrix (one form at a time) to printing same on laser.  The   
> standard laser form is three to a page vertical and the final form   
> goes all the way to the bottom of the page.  I am not sure what the   
> right technique is to print these, the methods I have tried failed   
> because native filepro output skips to the next page before we get   
> to the bottom.  I have tried varying page size, form size, etc., but  
>  only made the problem worse.  I'm sure others are doing this and   
> just want to know what is the right approach to printing these laser  
>  forms where there are multiple forms down the page.

How close to the bottom edge do you need to print?  Most laser printers
have an area around the edge of the paper where they physically cannot
print.

I believe there are PCL codes to set the logical margins to zero, but
this will not affect the physical margins.  (Anything outside of the
physical margins will fail to end up on the paper.)

If you can give more specifics, Jim Asman can probably give you the PCL
codes needed.  (Are you using a report or form?  How many lines per
page [or per form] are you using?)

-- 
KenBrody at BestWeb dot net        spamtrap: <g8ymh8uf001 at sneakemail.com>
http://www.hvcomputer.com
http://www.fileProPlus.com