@ud and @ub updated

[Dennis Malen]

As a further update I went into "input" and at the top of the processing 
placed an "end" on the first line. I then put the @key code and moved it 
right under the "end" line.

The error still occurred. There is something that causes the record to go 
into update mode and effectuate and esc esc.

If you did not have any processing in input and you pressed esc esc it would 
update the @ud and @ub.

Dennis Malen
516.479.5912
----- Original Message ----- 
From: "Dennis Malen" <dmalen at malen.com>
To: "Bruce Easton" <bruce at stn.com>; <filepro-list at lists.celestial.com>
Sent: Monday, April 09, 2007 5:40 PM
Subject: Re: @ud and @ub updated


> Bruce and Ken,
>
> I tried the lookup - in another file and it did not change @ud and @ub.
> There must be something I have in "input" which causes the record to go 
> into
> update mode when I am taken to the new record to view.
>
> Obviously, when lookup - transfers me to another record in the problem 
> file
> there is processing in "input" that causes it to update and therefore 
> change
> the two fields.
>
> Do either of you have any idea of what type of processing in "input" would
> cause the entire "input" processing to be activated. Now by the process of
> elimination, thanks to the list, this is what appears to be happening.
>
> Where do I now start to look in "input" processing????
>
> I remember years ago there was a filepro article that was written that
> indicated that when doing any updating it should be done after @entsel so
> that if someone was running a report the record in update would not effect
> the running of the report.
>
> Just as a reminder, I deactivated auto proc and @entsel and the problem
> still persisted.
>
> Dennis Malen
> 516.479.5912
> ----- Original Message ----- 
> From: "Bruce Easton" <bruce at stn.com>
> To: <filepro-list at lists.celestial.com>
> Sent: Monday, April 09, 2007 3:45 PM
> Subject: RE: @ud and @ub updated
>
>
>> Dennis Malen wrote Monday, April 09, 2007 3:23 PM:
>>>
>>> Bruce,
>>>
>>> I did deactivate auto prc and @entsel. Neither solved the problem.
>>>
>>> Dennis Malen
>>
>> OK - this is starting to go beyond cocoa puffs.  But, Dennis - in
>> reviewing your older posts I  just noticed that you said back on Friday:
>>
>>>>I never had this problem in 4.8. I am on AIX and am not sure whether
>>>>that could be the problem.
>>
>> AIX?? does anyone out there speak French???
>>
>> Ken - could the AIX be different than other platforms for 5.0?
>> Also, Dennis - what level of 5.0 are you on?
>>
>> Bruce
>>
>> Bruce Easton
>> STN, Inc.
>> _______________________________________________
>> Filepro-list mailing list
>> Filepro-list at lists.celestial.com
>> http://mailman.celestial.com/mailman/listinfo/filepro-list
>>
>>
>>
>
> _______________________________________________
> Filepro-list mailing list
> Filepro-list at lists.celestial.com
> http://mailman.celestial.com/mailman/listinfo/filepro-list
>
>
>