printer

[Tom Palmquist]

Hi Charlie,

I played with a Star Micronics thermal
printer a while back and if memory serves
me, the "n" should be a number that represents
either a full or partial cut by the blade. It
does both.

That number should be found either in the tech
manual or on the web.

Regards

----------------------
Tom Palmquist


CDAY stated the following on 10/15/2006 12:59 PM:
> 
>  I have a customer who bought a thermal transfer Star receipt printer
>  with automatic paper cutter, running Windows XP, filepro 5.0.xx.
> 
>  I am telling the printer to use the panasonic print codes in filePro
>  same as does customer's old dot matrix Star printer.
> 
>  The data output from filePro prints fine, but the cutter bar is not
>  being actuated.
> 
>  Hex code for paper cutter is said to be $1B 64 n
> 
>  I have inserted this into the panasonic printer maintenance codes and
>  inserted that code on the receipt output format
> 
>  This does not actuate the paper cutter.......
> 
>  Can anyone tell me what I should be doing to make the cutter bar actuate?
> 
>  Charles Day
> 
> 
> _______________________________________________
> Filepro-list mailing list
> Filepro-list at lists.celestial.com
> http://mailman.celestial.com/mailman/listinfo/filepro-list
>