Memo magic is really distressing filepro user
GCC Consulting
gccconsulting at comcast.net
Fri Aug 4 12:07:11 PDT 2006
> -----Original Message-----
> From:
> filepro-list-bounces+gccconsulting=comcast.net at lists.celestial
> .com
> [mailto:filepro-list-bounces+gccconsulting=comcast.net at lists.c
> elestial.com] On Behalf Of John Esak
> Sent: Friday, August 04, 2006 12:29 PM
> To: Fplist (E-mail)
> Subject: RE: Memo magic is really distressing filepro user
>
> I *know* there can't be anything wrong with the code you have
> shown below as a MEMO entry snippet, but I want you to add
> one line to it.
>
> On the line after the "memo edit" line, put WRITE on a line by itself.
>
> If you want to see why this is required at the 5.0.13 level
> of filePro, check on the filePro Survivor CD's. One of the
> lessons in the chapter on MEMO shows your example with and
> without the WRITE and what happens. It may apply to what is
> happening to you. I will assume since I submitted this as a
> bug report that the problem was fixed after 5.0.14, since it
> was still there then. Haven't checked in 5.0.6, but I will
> shortly and let everyone know.
> (I believe you bought the Survivor Series... a few Tony's
> did... and I seem to remember an "Old Tony" in there... :-)
>
> John
I have found that ANY data entry, to the current record/file, done at @key
will not hold unless a write is executed just before the END.
I will assume that since there is no save/escape executed when the @key
routine hits an end command, the record is left as it was. One needs to
force the write to lock in any changes to the record that are made.
Richard Kreiss
GCC Consulting
>
> > -----Original Message-----
> > From: filepro-list-bounces+john=valar.com at lists.celestial.com
> > [mailto:filepro-list-bounces+john=valar.com at lists.celestial.com]On
> > Behalf Of Tony Freehauf
> > Sent: Friday, August 04, 2006 10:07 AM
> > To: filepro-list at lists.celestial.com
> > Subject: Memo magic is really distressing filepro user
> >
> >
> > Memo erases sometimes-why (its like magic) I thought my blob woes
> > where gone when I discovered blobfix.
> > Well blobfix takes memo's from not working to working.
> > But now
> > Sometimes
> > When the user goes into the blob the blob information disappears.
> > No error message appears.
> > The data is just gone.
> > And this happens only rarely.
> > Some details below
> >
> > Any suggestions except will be appreciated.
> > Thanks
> > Old tony
> >
> > Some details.
> > This has worked fine for 6 months.
> > There are about 5000 memo according to the blobfix count Memo is
> > called by using @KeyN
> > @KeyN::':
> > :: memo 157 edit("3","1","14","80") nowrap:
> > Using SCO 5.06 and filepro 5.013
> >
> > _______________________________________________
> > Filepro-list mailing list
> > Filepro-list at lists.celestial.com
> > http://mailman.celestial.com/mailman/listinfo/filepro-list
>
> _______________________________________________
> Filepro-list mailing list
> Filepro-list at lists.celestial.com
> http://mailman.celestial.com/mailman/listinfo/filepro-list
>
More information about the Filepro-list
mailing list