OT: Problem Installing SCO 5.0.6 on HP ML530

[Enrique Arredondo]

On Fri, 23 Sep 2005, Lerebours, Jose wrote:

> Trying to install SCO 5.0.6 on ML530 and keep running
> into same problem no matter what I try.
>
> PROBLEM:  No root disk found ....
>
> I have configured arrays and logical drives.  I boot of
> SCO CD and while sitting at Boot:, I can see that it
> finds 1 physical drive (says nothing about logical).
>
> As boot continues, I notice that it says that no HDs were
> found ... even when the array is there and the logical
> drive has been defined.  I have the EFS disks but I do not
> know how to tell boot to look for "boot time drivers" off
> the floppies I have.
>
> Any ideas?
>
> Thank you all in advance.
>
>
> --
> Jose Lerebours
> _______________________________________________
> Filepro-list mailing list
> Filepro-list at lists.celestial.com
> http://mailman.celestial.com/mailman/listinfo/filepro-list
>

I use this command to boot when my SCSI is AMIRD, in your case might be 
SYSlogic (?) :

: defbootstr link=amird Sdsk=amird(0,2,0,0)

and then it will ask you for the floppy (replace amird with whatever you 
have).