tok problem after upgrade

[Dennis Runolfson]

Eureka!

I didn't even know there was such a variable.  I set it and now forms are
working.
Many, many, many thanks!

Dennis

> Dennis,
>
> Another thought about environmental var:  PFFORMTOKSIZE!!!
>
> What value do you have this set to.  I usually set it to 400000.
>
> Faisal karim
>
> ********************************************************************
>
> -----Original Message-----
> From: filepro-list-bounces at lists.celestial.com
> [mailto:filepro-list-bounces at lists.celestial.com] On Behalf Of Dennis
> Runolfson
> Sent: Monday, January 31, 2005 1:25 PM
> To: filepro-list at lists.celestial.com
> Subject: tok problem after upgrade
>
> Good morning to all,
>
> Saturday I did an upgrade of my Linux operating system and then the
> filepro system.  I had been running 5.0.05 but found that it would not
> run on the new Linux - it returned segmentation errors.  So I installed
> 5.0.13 full development - it installed without errors.  Think that
> might be an issue with some Linux libraries.
> We ran a couple of tests to be sure all was well before heading home.
> I could access files, hard copy from screens and print reports. This
> morning I find that I cannot print using the form function.  It gives a
> tokenization error.  I don't use tok files and use dcabe, dclerk, etc
> in the menus.
> *** A filePro Error Has Occurred ***
>
> Error in printing the form
>
> On File: /appl/filepro/f1propos1/prc.propos1
>
> Processing Table: automatic
>
>
> The tokenization table is too small.?
> Use '-t biggersize' to make it bigger.?
>
> i didn't expect it to work but I tried adding -t 120000 to the menu
> anyway - results in the same problem. Has something changed to where I
> have to unse the runtime programs now? Hopefully this is enough
> information to help.
> Thank you,
>
> Dennis Runolfson
>
>
>
> _______________________________________________
> Filepro-list mailing list
> Filepro-list at lists.celestial.com
> http://mailman.celestial.com/mailman/listinfo/filepro-list