printing to windows spooler - width of doc problem

Jay R. Ashworth jra at baylink.com
Wed Apr 6 16:26:29 PDT 2005


On Wed, Apr 06, 2005 at 02:34:29PM -0400, Dennis Malen wrote:
> I was playing around with the various codes that were in my HP-4+ 
> definitions. The last one I used was $ib @s1c. This was in my definitions 
> from day one in filePro.
> 
> When I spoke to Jim Asman he suggested that I use $1b &s1C. I tried this one 
> first and it did not work so I looked in the definitions for something else 
> to use and I found the one above. I tried it and it did not work. The blank 
> spaces between the "s" and "1" and between the "1" and "c" are not in my 
> definition. It has no spaces. In any event, neither code worked.

Two reasons, Dennis:

"$ib" will work much less well than "$1b".  :-)

And the "c" vs "C" thing is an HP PCL thing: capital usually means set
the option, and lower case means clear it (I did get the polarity
right, right Jim?  :-).

So it will definitely not help to get the case wrong.

Cheers,
-- jra
-- 
Jay R. Ashworth                                                jra at baylink.com
Designer                          Baylink                             RFC 2100
Ashworth & Associates        The Things I Think                        '87 e24
St Petersburg FL USA      http://baylink.pitas.com             +1 727 647 1274

      If you can read this... thank a system administrator.  Or two.  --me


More information about the Filepro-list mailing list