OT: DMP heads need rebuilding

[Jay R. Ashworth]

On Wed, Dec 10, 2003 at 04:33:27PM -0500, Tom Pancero wrote:
> I STILL use a Tandy DMP-2100 to print bulk mail labels.
> I used to have a service depot that would rebuild/repair the
> print heads.  They no longer exist.  Does anyone on the list
> know of any organization that will rebuild/repair the heads??

Not off hand, but *that* one was an OEM'd Toshiba 351, IIRC.

Also a nice printer, if you had the right *cable* (the default
Centronics ground wire was that printer's remote SELECT line; if you
didn't clip the wire, a standard printer cable would take it off line,
just as long as you left it plugged in.  I once covered the pin with
*scotch tape* to get one working).  We've got a couple big chain
printers we could sell you cheap, if bulk is bulk enough to make it
worthwhile.

Cheers,
-- jra
-- 
Jay R. Ashworth                                                jra at baylink.com
Member of the Technical Staff     Baylink                             RFC 2100
The Suncoast Freenet         The Things I Think
Tampa Bay, Florida        http://baylink.pitas.com             +1 727 647 1274

        Come see Linux Gazette in our new home: www.linuxgazette.net!