Box functions with PCL printer do not work
Dennis Malen
dmalen at malen.com
Fri Mar 12 09:20:48 PST 2004
Thanks so much to Ken and Jim for their imput. I think they hit it on the
head.
I will let the group know the results after some experimentation on my part,
in order that others will be able to fix the same problem.
Thanks again,
Dennis Malen
516.479.5912
----- Original Message -----
From: "Kenneth Brody" <kenbrody at bestweb.net>
To: "Dennis Malen" <dmalen at malen.com>
Cc: "filePro mailing list" <filepro-list at lists.celestial.com>
Sent: Thursday, March 11, 2004 2:28 PM
Subject: Re: Box functions with PCL printer do not work
Dennis Malen wrote:
>
> Ken,
>
> I am using the hp4+ definitions. Lines do not come up. A's come up on the
> line with some quotes at the top of the A's. I can send you a copy if you
> wish.
[...]
Your printer is set to the wrong extended character set and/or code
page. How to change this, I can't say. But, if it's true PCL, I'm
sure Jim Asman can probably give you an init code off the top of his
head.
For example, start wordpad. Then type Alt+196 and you will see the
horizontal line. Then type Alt+0196 and you will see the dotted-A.
For those with Windows systems:
Alt+196 - - - - -
Alt+0196 Ä Ä Ä Ä Ä
They are both represented by character 196, but they are in different
character sets.
--
+---------+----------------------------------+-----------------------------+
| Kenneth | kenbrody at spamcop.net | "The opinions expressed |
| J. | http://www.hvcomputer.com | herein are not necessarily |
| Brody | http://www.fptech.com | those of fP Technologies." |
+---------+----------------------------------+-----------------------------+
More information about the Filepro-list
mailing list