filepro/Lexmark RT+ printer

Linda Hapner fplist at hapner.com
Fri Jun 11 07:11:13 PDT 2004


wow!  Thanks Steve and Ken -- this has just moved up on my to do list -- 
especially if I can play with the bins.

thank you thank you -- 

Linda

----- Original Message ----- 
From: "Steve Wiltsie" <swiltsie at micro-mui.com>
To: "filePro Mailing List" <filepro-list at seaslug.org>
Sent: Friday, June 11, 2004 7:56 AM
Subject: Re: filepro/Lexmark RT+ printer


> ----- Original Message ----- 
> From: Linda Hapner
> To: Filepro-list at lists.celestial.com
> Sent: Thursday, June 10, 2004 9:06 PM
> Subject: filepro/Lexmark RT+ printer
>
>
> I'm going to be attaching our Lexmark Optra RT+ laser printer as a filepro
> printer in the near future.  Thought I'd ask if anyone knows of the proper
> driver to use before I dig out the manual and try to figure it out.  Also,
> I'm sure I'm stretching here, but this lexmark has 5 bins that I can
control
> in WordPerfect -- it would be nice if I can control in filepro somehow.
>
> Linda,
>
> As Ken responded, the R series printers from Lexmark respond to PCL5
> commands like an HP laserjet.  You may find there are some small
differences
> in the commands to choose a source tray, however.  I have several clients
> using various models of Lexmark lasers successfully from filePro in SCO
and
> Windows environments.  Here is an example of the filePro tray selection
> printer commands for one of them that has 5 input trays (and 4 output
> trays):
>
>  $1b & l 1 H           Source Tray 1
>  $1b & l 4 H           Source Tray 2
>  $1b & l 5 H           Source Tray 3
>  $1b & l 20 H         Source Tray 4
>  $1b & l 21 H         Source Tray 5
>  $1b & l 6 H           Source Envelope Tray
>  $1b & l 2 H           Source Manual Feed
>
> $1b & l 1 G             Output Standard Bin
> $1b & l 3 G             Output Bin 1
> $1b & l 4 G             Output Bin 2
> $1b & l 5 G             Output Bin 3
> $1b & l 0 G             Output Autoselect Bin
>
> (the 'l' character is a lower case L)
>
> You will need to check the manual specific to the RT+ model but I think
you
> should find these may work for you - or at least be fairly close.
>
> Steve Wiltsie
> microCONCEPTS Div.
>
>
> _______________________________________________
> Filepro-list mailing list
> Filepro-list at lists.celestial.com
> http://mailman.celestial.com/mailman/listinfo/filepro-list
>
>
>




More information about the Filepro-list mailing list